Determination of Allura Red and Tartrazine in Food Samples by Sequential Injection Analysis Combined with Voltammetric Detection at Antimony Film Electrode

An antimony film electrode prepared on‐line and installed as part of a sequential injection system, was used as an electrochemical detector to determine azo dyes in food samples. The influence of several flow variables were evaluated using a central composite design. In optimal conditions, the linear range of the calibration curve varied from 1–5 µM, with a limit of detection limit of 0.3 µM. The relative standard deviation of analytical repeatability was <5.0 %.The method was validated by comparing the results obtained with those provided by HPLC; no significant difference were seen.     

Direct Insight into the Three‐Dimensional Internal Morphology of Solid–Liquid–Vapor Interfaces at Microscale

Solid–liquid–vapor interfaces dominated by the three‐phase contact line, usually performing as the active center in reactions, are important in biological and industrial processes. In this contribution, we provide direct three‐dimensional (3D) experimental evidence for the inside morphology of interfaces with either Cassie or Wenzel states at micron level using X‐ray micro‐computed tomography, which allows us to accurately “see inside” the morphological structures and quantitatively visualize their internal 3D fine structures and phases in intact samples. Furthermore, the in‐depth measurements revealed that the liquid randomly and partly located on the top of protrusions on the natural and artificial superhydrophobic surfaces in Cassie regime, resulting from thermodynamically optimal minimization of the surface energy. These new findings are useful for the optimization of classical wetting theories and models, which should promote the surface scientific and technological developments.     

High‐Contrast Red–Green–Blue Tricolor Fluorescence Switching in Bicomponent Molecular Film

Highly efficient red–green–blue (RGB) tricolor luminescence switching was demonstrated in a bicomponent solid film consisting of (2Z,2′Z)‐2,2′‐(1,4‐phenylene)bis(3‐(4‐butoxyphenyl)acrylonitrile) (DBDCS) and (2Z,2′Z)‐3,3′‐(2,5‐bis(6‐(9H‐carbazol‐9‐yl)hexyloxy)‐1,4‐phenylene)bis(2‐(3,5‐bis(trifluoromethyl)phenyl)acrylonitrile) (m‐BHCDCS). Reversible RGB luminescence switching with a high ratiometric color contrast (λ_em=594, 527, 458 nm for red, green, and blue, respectively) was realized by different external stimuli such as heat, solvent vapor exposure, and mechanical force. It was shown that Förster resonance energy transfer in the bicomponent mixture could be efficiently switched on and off through supramolecular control.     

Metal‐Doped Nitrogenated Carbon as an Efficient Catalyst for Direct CO2 Electroreduction to CO and Hydrocarbons

This study explores the kinetics, mechanism, and active sites of the CO₂ electroreduction reaction (CO2RR) to syngas and hydrocarbons on a class of functionalized solid carbon‐based catalysts. Commercial carbon blacks were functionalized with nitrogen and Fe and/or Mn ions using pyrolysis and acid leaching. The resulting solid powder catalysts were found to be active and highly CO selective electrocatalysts in the electroreduction of CO₂ to CO/H₂ mixtures outperforming a low‐area polycrystalline gold benchmark. Unspecific with respect to the nature of the metal, CO production is believed to occur on nitrogen functionalities in competition with hydrogen evolution. Evidence is provided that sufficiently strong interaction between CO and the metal enables the protonation of CO and the formation of hydrocarbons. Our results highlight a promising new class of low‐cost, abundant electrocatalysts for synthetic fuel production from CO₂.     

Individual Surface‐Engineered Microorganisms as Robust Pickering Interfacial Biocatalysts for Resistance‐Minimized Phase‐Transfer Bioconversion

A powerful strategy for long‐term and diffusional‐resistance‐minimized whole‐cell biocatalysis in biphasic systems is reported where individually encapsulated bacteria are employed as robust and recyclable Pickering interfacial biocatalysts. By individually immobilizing bacterial cells and optimizing the hydrophobic/hydrophilic balance of the encapsulating magnetic mineral shells, the encased bacteria became interfacially active and locate at the Pickering emulsion interfaces, leading to dramatically enhanced bioconversion performances by minimizing internal and external diffusional resistances. Moreover, in situ product separation and biocatalyst recovery was readily achieved using a remote magnetic field. Importantly, the mineral shell effectively protected the entire cell from long‐term organic‐solvent stress, as shown by the reusability of the biocatalysts for up to 30 cycles, while retaining high stereoselective catalytic activities, cell viabilities, and proliferative abilities.     

共线式热电发电机在侧面散热情况下的性能

热电材料是一种环境友好型功能材料,其可以实现热能与电能的相互转化,在热电发电、热电制冷中具有许多应用.传统的热电发电机为$\pi$型结构,要求热电腿的长度相等,在某些情况该结构不利于热电发电机的优化设计.热电发电机在高温工况下会引起强烈的热应力甚至应力集中,从而缩短了其工作寿命.另外,热电发电机的工作温度于环境温度,这样必然会有一部分热量散失到环境中,从而影响热电发电机的性能.针对该现象,本文建立了考虑散热的新型共线式热电发电机模型,该模型的热电腿可以独立进行优化,基于有限元方法,对考虑侧面散热的共线式热电发电机进行了仿真模拟,分析了其在狄利克雷边界条件下的热电性能和力学性能,得到了热电发电机的温度场、电势场、应力场,探究了不同强度的对流散热系数对热电发电机热电性能和力学性能的影响.结果表明,对流散热会降低热电发电机的能量转化效率,当对流换热系数达到~100W/(m$^{2}\cdot$\textcelsius) 时,效率为~0.0479,该值比绝热状态的转化效率0.066 7 低28%.对流散热使热电发电机侧面热损失增加,降低了热应力.在实际应用中,应合理优化设计隔热系统,提高能量的转化效率.      

Observation of insulating–insulating monoclinic structural transition in macro‐sized VO2 single crystals [Phys. Status Solidi RRL 5, No. 3, R107–R109 (2011)]

In our article, we reported the observation of monoclinic M2 to M1 structural phase transition in VO₂ single crystal near the temperature of ～49 °C. However, the re‐examination of Laue patterns reveals that previously defined monoclinic M1 and M2 phases can be interpreted as monoclinic M2 and triclinic T phases instead. Careful experimental geometry calibration and further refinement of the lattice parameter ratios and angles show that monoclinic M2 and triclinic T phases fit better with the experimental data. On the other hand, our previous misidentification of the insulating phases does NOT affect the conclusions of our article. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Existence of global weak solutions for Navier‐Stokes‐Poisson equations with quantum effect and convergence to incompressible Navier‐Stokes equations

In this paper, we consider a three dimensional quantum Navier‐Stokes‐Poisson equations. Existence of global weak solutions is obtained, and convergence toward the classical solution of the incompressible Navier‐Stokes equation is rigorously proven for well prepared initial data. Furthermore, the associated convergence rates are also obtained. Copyright © 2014 John Wiley & Sons, Ltd.     

Dynamic output feedback consensus of continuous‐time networked multiagent systems

This article addresses the dynamic output feedback consensus problem of continuous‐time networked multiagent systems. Both a fixed topology and Markovian switching topologies are considered. The consensus algorithms are on the base of the output information of each agent's itself and its neighbors. Some sufficient conditions for consensus of multiagent systems are obtained in forms of bilinear matrix inequalities. The algorithm based on the homotopy continuation method is given to compute the feasible controller gains. Numerical simulations are given to show the effectiveness of the proposed results. © 2014 Wiley Periodicals, Inc. Complexity 20: 35–42, 2015